TBS UNIFY PRO 5.8 GHz V3 SMA

Transmitter of small size that can be installed on 99.99% of the chassis 3,’ 4’, 5’...

Attention 5V regulator binding (distribution plate, bec 5v, pololu...)

The 40HP give you the freedom of shopping in 25mw, on the band Raceband and without having to change the VTX !

Cleanswitch : you will not upset your comrades in flight when connecting your multi, but be careful not to be on the same frequency ;)

PitMode : allows you to reduce power to the minimum on a frequency that does not fight not the other drivers during a race or on a plot of vol, however, You have a few meters of range video to test your multi. Be careful to get out of this mode and go fly.

Note : The French regulation imposes a maximum power of 25mW in the frequency of 5.8 Ghz, as well as a pilot in double command for the practice of flight in immersion (FPV). The responsibility of a Reflection of the World/Aerial-shop.com cannot be held responsible for any use of this material without proper license.

FEATURES

• Operating voltage : 4.5 - 5.5 V
• Supply current : 600mA
• Operating temperature : to monitor the flow of air
• Weight : 5 g (without antenna)
• Antenna connector : SMA female, with mounting
• Video Format : NTSC / PAL (depending on bezel FPV and camera)
• Output power : 25mW, 200mW*, 500 mw*, 800mW*

* Important Note : The French regulation imposes a maximum power of 25mW in the frequency of 5.8 Ghz, as well as a pilot in double command for the practice of flight in immersion (FPV). The responsibility of a Reflection of the World/Aerial-shop.com cannot be held responsible for any use of this material without proper license.