Radiocommande Futaba 32MZ 2,4GHz

New high-end FUTABA radio for experienced competitors and modelers.
The 32MZ transmitter adopted the two-way communication system "FASSTest".
The receiver data can be checked in your transmitter through telemetry.
The FASSTest is a dedicated 2.4 GHz system with a maximum of 18 channels (16-way linear + 2-way switch).


Technical characteristics:

TRACK EXTENSION (MULTIPROP FUNCTION):
The multiprop function can be used using the MPDX-1 multiprop decoder sold separately.
The multiprop function is a function that divides a channel into eight channels and thus extends the number of channels.
You can use up to 2 x MPDX-1 and extend up to 32 channels in the following way:
- Linear channel - 14 channels (2 channels are used by the multiprop function)
- ON/OFF channel - 2 channels
- Multi-track - 16 lanes
Multiprop pathways have the following differences from normal linear pathways.
The resolution of the multiprop channel is lower than that of the linear channel.
The simultaneous use of several multiprop channels can reduce the operational response of the multiprop.
Multiprop channels cannot use the mixing function.
S.BUS2 SYSTEM:
Using the S.Bus2 system, several servos, gyroscopes and telemetry sensors are easily installed with a minimum of cables.
WINDOWS INTEGEDD COMPACT 7:
T32MZ uses the world-famous Microsoft Windows Embedded Compact 7, which provides outstanding reliability and valuable resources.
MAIN LCD DISPLAY :
The T32MZ has an HVGA color backlit LCD touch screen (640 x 240 pixels). The screen is manufactured with a transflective construction that allows visibility both inside and outside. COLOR LCD SUP DISPLAY:
The T32MZ has a color LCD display. It will be possible to find out the telemetry information separately from the main display. The sub-display uses a reflective LCD screen that provides good visibility even outdoors. MUSIC PLAY:
The T32MZ can play WMA (Windows Media Audio) files on a microSD card. You can listen to music using the internal speaker or stereo headphones through the earphone jack. An inter can be assigned to start/stop your music.
VOICE RECORDING:
You can record your own voice using the internal microphone, and then reproduce the commands assigned to certain inters. The recording time is up to 3 seconds and 24 voice files can be recorded.
Secure data (SD card):
Model data, music files, voice files and image files can be stored on an optional microSD card. The microSD card is also used when updating the software/features of the T32MZ. HIGH CAPACITY LITHIUM POLYMER BATTERY (6600 MAH):
The high-capacity Lithium Polymer battery allows you to extend your flight time.
EDITION:
The touch screen and the two input keys allow you to edit your model in the easiest way for you.
FUNCTION:
The internal dual processors take advantage of the many functions of the 32MZ and optimize the response time. Most of the mixing functions are handled by curves that allow very precise adjustments.
SLEEVE :
Each axis is supported by two ball bearings. The handles have non-contact potentiometers of the magnetic sensing type. This allows for finer and more precise operation. In addition, the throttle has an adjustment (screw accessible from the outside, which allows you to choose the notching or spring.
INTERSTELLAR:
You can replace 4 of the slide switches located at the top right and left, with optional switches (two-position, three-position, momentary, etc.).
VIBRATION FUNCTION :
Low voltage and other alarms generate vibration. The alarms or vibrations to be used can be selected by the user.
R7108SB:
This set comes with the R7108SB S.Bus2 dual antenna "Diversity" receiver offering two-way communication.

CONTENTS of this set T32MZ :

-Transmitter T32MZ
-R7108SB
-LT1F6600B Polymer lithium battery and power adapter
-Switch
-Toolbox (includes a special template for adjustment)
-Strap
-Aluminum suitcase
-French Quick Information Leaflet.

TRANSMITTER SPECIFICATIONS :

- 2.4GHz band
- FASSTest/ FASST/T-FHSS/S-FHSS system with 2 handles, 18 channels, 2.4 GHz
-3.8V lithium-polymer power supply L1F6600B
- RF Power: 100mW ERP
- WEIGHT (with battery): 1126 g

R7108SB RECEIVER SPECIFICATIONS :

-SIZE: 24.9mm x 47.3mm x 14.3mm
-WEIGHT: 12.0 g
-Power Supply: 3.7 - 8.4V