Controleur de vol F722-MINI SE

The F722-MINI SE Flight Controller from Mateksys, in 20x20 format but convertible into 30x30mm!

Technical specifications:

• MCU: 216MHz STM32F722RET6
• Model NO.: MPU6000 (SPI)
• OSD: AT7456E (SPI)
• Model no.: Infineon DPS310 (I2C)
• Blackbox: 32M-byte Flash memory (SPI)
• 5x Uarts (1,2,3,4,6) with build-in inversion
• 1x Softserial supported
• 8x Dshot/Proshot/oneshot outputs
• 1x I2C
• 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• Vbat filtered output power for VTX, Switchable via AUX (tab-user1 modes)
• Dual Camera image switchable via AUX (tab-user2 modes)
• Convertible 20mm to 30.5mm 
• Camera control: Yes
• Smartaudio & Tramp VTX protocol: Yes
• DJI OSD: Yes (any spare Uart Tx & Rx)
• WS2812 Led Strip: Yes
• Beeper : Yes
• RSSI: Yes
• Additional ADC for INAV analog airspeed

• Input: 6~36V (2~8S LiPo)
• BEC: 5V 2A
• LDO 3.3V: Max.200mA
• Battery Voltage Sensor: 1:10 (Scale 110)
• No Current Sensor built-in, supports external current sensor of PDB/4in1

• Format 20 x 20mm/Φ3mm with damper Silicone 
• Format 20 x 20mm/Φ2mm with Silicone & brass shock absorbers
• 30.5x 30.5mm/Φ3mm with Conversion Plate & silicone Shock Absorbers 
• Dimensions: 28 x 28 mm
• Weight: 5g

Product content:

• 1x FC F722-Mini
• 1x 20mm to 30.5mm conversion plate
• 6x silicone Shock Absorbers M4 to M3
• 6x M3 to M2 brass spacers
• 1x SH1.0_8pin cable 5cm
• 2x SH1.0_8pin connectors