Cut glass fibers 3mm (200g)

Fiberglass strands cut into 3 mm, perfect for reinforcing your epoxy fillets, or thickening any work with epoxy resin while ensuring strength.

good anchorage

Ideal for polyester resins thanks to the coating, well suited for epoxy resins

Technical characteristics:

Fiber type: E glass
Cross-sectional shape: Round
fiber size: 9-14 µm
Length: 3 mm ±5 mm
Specific gravity: 2.53–2.55 g/cm3
Dry heat resistance: approx. 315°C
Softening temperature: approx. 840°C
Moisture content on delivery: max. 0,3 %
Color: White
Surface treatment: based on silane 0.5–1.5 %

Resistance to light, weathering, aging = good
Acid resistance = good
Alkaline resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Application:
Fiber pastes and molding compounds, synthetic plasters, sealants, adhesives, corrosion protection coatings and asbestos substitutes. In the case of mating, layers to fill and strengthen the edges and seal the alignment studs and screwed fittings construction in the mold, a mixture of 50% vol. chopped glass fibers and 50% vol. cotton floc is mainly used. The volume details are intended to help judge the quantity supplied. These details refer to the bulk quantity. The contents may compress during transportation or storage.

Quantity: 200g bag