Lentus 3m Multiplex Kit

The Lentus Thermik is the latest addition from MULTIPLEX. This model has been designed to evolve within a club with two strong points, thermal flight and slope flight.

KIT # 1-00899: Model delivered with elements of the fuselage, wings, tailplane, ELAPOR® cabin frame, canopy canopy, CFK ALUMINUM spar, all the small plastic parts necessary for assembly, all rod fittings, cone, drive plate, clamp, pre-cut decoration board and detailed assembly instructions

The Lentus Thermik has been designed to evolve both in thermal flight on the plain and on the slope.
On this Lentus, Multiplex has integrated a multitude of innovative developments and it will delight you thanks to its very healthy flight characteristics as usual at Multiplex.

It is visible here in flight.

Technical characteristics:

- Wingspan: 3m

- Length: 1.41m

- Weight: 2300 to 2600g

- Functions: Ailerons, steering, depth, engine, flaps

- Wing area: 44-49 g/dm2

- RC Functions: Steering, Depth, Motor, Ailerons, Flap

- Optional: Retracting gear and tow hook

- Flight time: about 30min without ascents.

- Designed to receive an optional specific landing gear (sold separately), this model, with a 4S 2600 battery and an 8x6" propeller, becomes autonomous, i.e. it is able to take off from the ground!
- Thanks to a modern profile, this model achieves very high performance and allows a dynamic flying style
- Healthy characteristics to spiral safely in the ascents
- Semi-model reproduction inspired by the most modern gliders
- Transparent canopy with detailed cockpit
- Tow hook already in place, usable even in electric version, (requires 1 HS65HB servo sold separately)
- Possibility of mounting Vario TEK (Display of speed and Vario data) (Sold separately)
- The wings with 4 control surfaces allow very precise landings (Butterfly)
- Heavy-duty wings with double CFK-ALU spars
- Connection of servo contacts with M6 high current sockets in the wings
- Removable steering flap, with groove hinges
- Extremely rigid fuselage in M-Space technology with a Ø20mm profile tube
- Control surfaces reinforced with stainless steel tubes
- Spacious and well-structured interior, for batteries, RC and telemetry (Sold separately)
- Quality decoration board with pre-cut patterns
- Landing pad made of impact-resistant adhesive
- Protection of the leading edge integrated into the decoration board
- Carrying bag available for safe transport (Sold separately)
- Designed and manufactured in Germany